Ruger BX Trigger Work
(PLEASE NOTE! At this point, as far as we can tell, our modified BX triggers may not function in Tactical Solutions rifles. As near as we can tell from our inspections, the Tactical Solutions receiver does not hold the trigger group as precisely as the factory reciviers, and the bolts do not come back nearly as far as the factory due to the way the bolt and buffer is machined. As a result, the bolt does not depress the hammer far enough on it's rearward travel to reliably reset the trigger. If you leave all of the overtravel in there, it will probably work, but otherwise it is simply short stroking the hammer. We are coming out with a drop in trigger kit which should achieve an even better trigger pull, and have enough compensation built in to handle the sloppy TacSol parts. Also, any of our standard 10/22 trigger work should work fine in the XRing rifles since the disconnector behaves differently than on a BX trigger. We appreciate your understanding, and please ask if you have any questions! We are working on a work-around, but other than introducing more overtravel, I don't have a better solution at this point)
Presenting the only billet aluminum trigger and full trigger work available for the BX trigger that we are aware of at this point!
If you're familiar with our trigger work, this is basically our Tier 2 trigger work performed on the BX trigger group. It's a huge improvement over the standard Tier 2 triggers however because the internal geometry on these groups is completely different than on the factory triggers. That's why we have to machine a separate type of trigger, and why you aren't seeing a ton of other options on the market just yet.
When we initially launched this service, we were getting trigger pull weights down to 1lb. However long term testing proved that they were not as reliable as the 1.5lb pull weight. It wasn't a ton that failed, but more than we would like to see, so as a result, the 1.5lb pull weight is the only option for these triggers. It's actually fairly difficult to get them up to 2lbs, so that's also not an option unless you absolutely need to have it for some reason. But we can do that with the standard 10/22 group, so you're basically wasting a BX trigger.
This trigger work will finish out with just a little bit of pre travel, a solid wall, very crisp break, with minimal overtravel and a short reset. After doing dozens of standard 10/22 groups over the course of a day, when I get to do a BX trigger I'm always blown away by how much better the BX feels.
(Again, because of the unique internal geometry that these triggers have, we cannot perform a Tier 1 type of trigger work, and remove the pre travel. This basic BX trigger job will result in surprisingly little pre travel, but it will still be there)
As with our other trigger work, to order you just add the item to your cart, and check out as you would with anything else online. You'll get an emailed confirmation which will have all of the shipping and packaging information. If possible, print out that email and include it with your trigger group when you send it in. You'll get an email when it arrives, and another when we ship it back less than a week later.
Thanks for looking! If you have any other questions, just let us know via the 'Contact Us' button floating around the right side of your screen.
Top quality vin...