Lock iconRectangle 1Rectangle 2 + Rectangle 2 CopyShapeRectangle 1

Tier 2 (Intermediate) Ruger 10/22 Trigger Work

  • Sale
  • $ 73.50



This sale is for services on your trigger group. Component pieces of your group can be upgraded, but you supply the initial group.

We have an absolute one hundred percent money-back guaranty on all services provided. We are running a business, but if our customers are not happy, we will not be in business for long!

The Trigger Job
This trigger work has everything the basic trigger job has, so it's not a bad idea to at least skim the page to get some idea of what we are doing here. This job literally picks up where the basic trigger job stops. All of the same polishing/fitting/tuning happens exactly the same, but this job adds a couple of parts. Primarily, you are getting one of our CNC machined triggers. You can get that trigger in Standard width, which is still slightly wider than the factory, or Full Width. The Full Width triggers does NOT fit more tightly in the trigger group! They both require the exact same fitting; the only difference is cosmetics and the way it feels on your trigger finger. As such, the choice is strictly personal preference. Be very cautious before deciding on the Full Width trigger, because it does require permanent modification of your trigger group, and it feels VERY wide!
However the real difference is that these triggers allow the instillation of an internal, torsion-type, trigger return spring mounted on the trigger itself. This torsion spring system has no moving or sliding parts (unlike the factory plunger) which allows us to get the take up and the reset silky smooth. The hole for the original trigger return spring is then drilled out, tapped, and an overtravel stop is installed in that hole. This is a much cleaner and more solid method than the screw through the trigger design.  The overtravel stop makes the trigger feel vastly more crisp, and theoretically improves accuracy. 

If you are more serious about your shooting or interested in competing, but still working within a budget, this is the job for you. It will result in an excellent trigger pull for a fraction of the cost of a full after market group. Of course, there are bragging rights and a custom look which come with a billet CNC'ed trigger housing, which is certainly something to consider. That said, it's hard to replace a little time and skill in hand fitting with any number of shiny after market parts, and we can often produce a better trigger pull than most of the aftermarket groups. It's not surprising really, you're not paying us to produce parts, just polish and fit them. Most of the big companies have a ton of money invested in the tooling to produce these custom pieces, so to keep costs down they have to produce them in large numbers. By just re-working the factory parts, we can invest the time needed to really fit and polish the parts as they should be, and still keep the overall cost down.

Pull Weight
2lbs is the lightest we can safely go with a 10/22 trigger. Doesn't matter what level of trigger work you get. The higher levels of work will give you a better trigger feel and more refined movement, but all three Tiers cannot go below 2lbs. 
The Sweet Spot is our most popular option. It's wherever your trigger naturally wants to go, and where it's typically where it feels best. It will be between 2 and 2.5lbs. 
2.5lbs is a great all-round option. It's heavy enough for beginning shooters or hunters, but it's still light enough for accurate shooting. 
3.0+lbs. This option is for folks who shoot in certain competitions that require at least a 3lb trigger. A 3lb weight will be hooked to the trigger, and the trigger will need to be able to pick up that weight. We do NOT recommend this pull weight for most people!! I understand that it doesn't sound like much of a difference, but when you have this trigger next to a 2.5lb trigger, it will feel significantly heavier and less precise. Unless you are confident that you are going to be shooting in these competitions, I would strongly encourage you to purchase any of the other options. 

Trigger colors
Click on the image at the top of the page with all of the triggers, to see the available color choices. We are a Cerakote Certified applicator, and every trigger is coated here in house. These are the colors we commonly stock, but in the future there will be options for truly custom colors. We have edited the above image to appear as true as possible in color to the finished product, but understand that there could be slight variations on color from one batch to the next, or when displayed on different monitors. If you are getting other parts Cerakoted, it is always best to do everything at the same time, so that the colors all match exactly.

THE AUTO BOLT RELEASE MODIFICATION
There is a little metal tab on the bottom of the trigger housing, towards the front of the trigger guard. If you hold the bolt to the rear, push up on this tab, and let the bolt forward, it will lock the bolt open. This is used as a safety on ranges that require the action to be open when the range is 'cold', or for when you are cleaning the barrel. To close the bolt however, you need three hands. One to hold the rifle, one to pull back on the bolt, and the third to press up on that tab and somehow rotate it to the rear. It's a pain, and not exactly safe if you have a loaded magazine inserted. Our modification makes it so you still lock the action open exactly the same as before, but to close the bolt you just pull back slightly on the charging handle and let it go, just like you do with any other semi-auto firearm. The hold back will will drop out of the way on it's own when you pull back on the charging handle, without you touching the bolt release. This is NOT a last round hold open! No 10/22 built has a last round hold open from the factory. There is one company making them, Google it if you have more questions. We don't carry or install the part.

Shipping Information
Complete shipping instructions and information can be found here.

$9.50 return shipping and handling will be added to your order when you check out, regardless of how many trigger jobs you purchase. Once you have purchased this service you will get a confirmation email with all the shipping and packing instructions. Print that off, and include it with your trigger.

We are currently processing triggers on Tuesday and Friday, and doing trigger work seven days a week. This means that you may not get an email immediately when it arrives here, for example, if your trigger arrives on a Saturday. In this case, your trigger will not be opened, the order processed, and you emailed until the following Tuesday. We have a guarantied one week turnaround time on trigger work, but it's usually much quicker than that. When finished, you will get another email saying that your trigger is finished and shipped, with a tracking number. 

Thanks for your interest! Feel free to contact us at any point, and happy shooting.

DISCLAIMER:
"RUGER" IS A FEDERALLY REGISTERED TRADEMARK OF STURM, RUGER & COMPANY, INC. AND IS ONE OF MANY FEDERALLY REGISTERED TRADEMARKS OWNED BY STURM, RUGER & COMPANY, INC. BRIMSTONE GUNSMITHING NOR THIS SITE ARE AFFILIATED IN ANY MANNER WITH, OR OTHERWISE ENDORSED BY, RUGER, OR STURM, RUGER & COMPANY, INC.

Customer Reviews

Based on 15 reviews Write a review